810-S Sierra Mass Flow Controller and Sierra Flow Controllers with Display up to 100 SLPM

810-S

Order Now

Purchase your Sierra 810-S Mass Flow Meters online

Click to enlarge image(s)

Features	Benefits
• Accuracy of +/- 1.5% of full scale	• No pressure and temperature corrections like Rotometers
• Direct monitoring of mass flow rate can be input directly into data acquisition and recording systems.	• No calculations required to determine Mass Flow as is required with Volume Flow indicating devices
• Flow ranges from 0-10 sccm to 0-15 slpm.	• Wide ranges available for your choosing
• Large LCD readout .	• View readout from any angle
• Primary Standard calibration for best accuracy & NIST traceability	• Most OTHER devices are calibrated with "Secondary Standards" They can not compete in accuracy
• Use with ALL inert gases & mixtures	• Simple LINEAR K-Factors for more than 100 gases
• CE approved	• Satisfy the strictest standards in your lab.

Click here for more Details

The Sierra 810C-DR Mass-Trak® Mass Flow Controller with Digital Display includes: A large LCD digital display readout available in your choice of engineering units; Featuring 0-5 VDC, 0-10 VDC, and 4-20 mA output signals; utilizes single ended 24 VDC input power; choice of eight inlet/outlet fittings. Electrical input/output is via a 15 pin "D" mating connector. Calibrated for any flow range from 0-10 sccm up to 50 slpm equivalent nitrogen flow; 1.5% Full Scale accuracy; maximum temperature 122°F (50°C); maximum pressure 150 psig (10.3 barg). Includes fast response integral mass flow control valve. Standard model requires 24 VDC regulated input power; a user selectable 0-5 VDC and 4-20 mA command signal selection is provided.
Sierra’s Patented Platinum Sensor design Technology is utilized in the design of the flow controller. This technology virtually eliminates zero-drift and provides excellent long-term stability. The 810C-DR Mass Flow Controller Massflow body is constructed of 10% glass-filled Nylon 6/6, the integral Flow Control valve is constructed of series 430F and 316 Stainless steel with Viton® "O"-rings and our patented chemically polished 316 stainless steel sensor is featured in the flow controller. CE Approved.

If you need your meter fast take advantage of the 5 business day Expedited Delivery program by selecting Expedited Delivery below

SKU	810-S
Weight	2.0 lb
Flow Rate
Units	This field is automatically filled in when you enter Flow Rate above. Note: SLPM is the most common standard. If your flow rate is less than 21 SCCM an additional charge of $100 will be added.
Standard Conditions	This field is automatically filled in when you enter Flow Rate above. Note: 70 F, 1 Atm is the most common
Gas Name	This field is automatically filled in when you enter Flow Rate above. Note: Air and N2 are the most standard.
Equivalent N2 Flow SLPM	This field is automatically filled in when you enter Flow Rate above. Note: We use this to size your meter at the factory.
LF Option?	This field is automatically filled in when you enter Flow Rate above. Note: If your flow rate is less than 21 SCCM an additional charge of $100 will automatically be added.
Operating Presure PSIG	This field is automatically filled in when you enter Flow Rate above. Note: If your pressure is between 40 - 150 PSIG an extra charge of $50 will automacilly be added.
MP Option?	This field is automatically filled in when you enter Flow Rate above. Note: Optimum calibration is for 30 PSIG, however if you require calibration at a pressure of more than 40 PSIG the cost is $50 extra.
Maximum Gas Temp C	This field is automatically filled in when you enter Flow Rate above. Note: The Maximum Gas Temperature for this meter is 50 Deg C, or 120 Deg F.
Min Outlet Pressure PSIG	Please enter the minimum Outlet Pressure. Typical ranges are 0 (atomspheric) to 15 PSIG.
FItting Selection	Select the fittings for your meter
Flow Orientation	Enter the Flow Orientation of the meter. The most common is horizontal
Output Signal	Select a 0-5 VDC, 0-10 VDC, or 4-20 mA Linear Output signal
Command Signal	Select a Local Set Point Potentiometer, 0-5 VDC, 0-10 VDC, or a 4-20 mA external command signal for your setpoint.
Oxygen Cleaning	Optional Oxygen cleaning for oxygen applications. Quality inspected with UV light.
Power Supply	Select a power supply to deliver 24 VDC from either 110 VAC (Not CE Approved) or 230 VAC with CE Approval and Euro Plug
Connectors and Cables	15 pin D-Connector with descrete cable for use with customer provided power supply.
Instruction Manual	Extra Instruction Manual. Note: Manuals can be downloaded free from this website.
Extended Warranty	Select an extended warranty. View Sample Certificate
Certificates	You may purchase material and conformance certificates if your application requires.
Calibration & Maintenance	Calibration packages represent 20%, 15%, and 10% discounts on Platinum, Gold, and Silver packages. Package for specific purchased serial number. View Sample Coupon
Expedited Delivery Option	Select Expedited delivery to have your meter shipped within 5 days after your order.
Qty

Price	$1,400.00
Sale Price	$1,300.00

Products

Shopping Basket

Create an account

Bookmark

Email A Friend!

Search

Purchase your Sierra 810-S Mass Flow Meters online

See Also

Best price $$$$$$ on Sierra Mass Flow Controllers and Meters

In Stock Specials

10 SLPM 822 Mass Flow Meter with Display

2 SLPM 822 Mass Flow Meter with Display

810-S Series Top Trak Mass Flow Controllers with Display

Site Map